产品中心

美国ELECTROMATIC DCF-900涂层测厚仪

分享到：

美国ELECTROMATIC DCF-900涂层测厚仪

美国ELECTROMATIC DCF-900涂层测厚仪

Dependable accuracy over the entire range of the gauge, not just at "calibration check" points.

Keypad-selectable English or metric units.

Continuous reading update detects soft coatings as probe tip "sinks" into them.

The DCF-900 includes the gauge and probe, a bare test plate, two precision calibration shims & instructions, all in a foam-fitted carrying case.

Calibration to NIST-Traceable standards is available upon request.

Remote probe permits easy access for difficult, hard-to-reach places.

Longer lasting, driftless calibration... Set it and forget it for long periods of time and from job to job

Very reliable operation... Consistent, repeatable measurements

Excellent results with thin substrates... As thin as 0.005" (10 µm)

Range:	0.1-40.0 mils (0-999 µm)
Resolution:	0.1 mil (1 µm)
Accuracy:	0-10 mils: ±0.1 mil 10-40 mils: ±1% of reading
Probe:	Monopolar, magnetic induction, 0.4" (10 mm) dia., spring-loaded, with V-notched shell and 28" (70 cm) cable
Battery/Life:	9 V alkaline/approx. 6 months normal use, with auto shutoff after 90 seconds of non-use.
Dimension:	5.7" x 3.1" x 1.5" (145 x 79 x 38 mm)
Weight:	9 oz. (250 g)
Temperature Limits:	Material: 15 to 140° F (-10 to 60° C) Ambient: 32 to 125° F (0 to 50° C)
Warranty:	One (1) year